BFMWG - BRAKE PARTS KIT,9400019
- MSDS: BFMWG
- Manufacturer: GOODYEAR AEROSPACE CORP
- Product Name: BRAKE PARTS KIT,9400019
- National Stock Number: 1630-00-739-5142
Product Identification
Product ID:BRAKE PARTS KIT,9400019
MSDS Date:01/01/1987
FSC:1630
NIIN:00-739-5142
MSDS Number: BFMWG
Responsible Party
Emergency Phone: 216-796-2121,24 HR
Cage: EO533
Contractor
Telephone: 216-796-2800
Cage: 25500
Ingredients
ASBESTOS, CHRYSOTILE
CAS: 12001-29-5
RTECS: CI6478500
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 2 FIBERS/CC; A1;9192
PHENOL-FORMALDEHYDE RESIN
CAS: 9003-35-4
Fraction By Weight: 15-20%
ACGIH TLV: NOT ESTAB (MFR)
0.05 MG(PB)/CUM)
Fraction By Weight: 2-7%
ACGIH TLV: 0.15 MG/CUM
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 2-7%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PARTICULATES NOT OTHERWISE REGULATED (NUISANCE DUST)
OSHA PEL 15 MG/M3 TOTAL DUST
ACGIH TLV: 10 MG/M3 TDUST; 8990
Hazards
Effects of Overexposure:NO ACUTE ADVERSE HLTH EFTS KNOWN.ABSESTOS
FIBERS,LEAD PARTICLES POSS IN ABRASN DUST. (SEE SUPP DATA)
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. OBTAIN MEDICAL ADVICE. SKIN
CONT:WASH W/SOAP & H*2O. EYE CONT:FLOOD W/H*2O FOR AT LEAST 15 MIN.
IFF IRRIT OCCURS,SEE A PHYSICIAN. INGEST:CONSULT A PHYS.
OTHER:CHANGE CLOTHES ,IF NEC,TO AVOID CARRYING DUST INTO OTHER
ENVIRONS
Fire Fighting
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
GEAR .
Unusual Fire/Explosion Hazard:COMBUSTION PRODUCTS OF THIS MATERIAL MAY
BE TOXIC.
Accidental Release
Spill Release Procedures:VACUUM OR WET CLEAN IF DUST IS INVOLVED. ANY
VACUUM SYSTEM SHOULD BE EQUIPPED W/AN OUTLET HEPA FILTER TO PREVENT
REINTRODUCING ASBESTOS FIBERS & LEAD PARTICULATES TO THE
ATMOSHPHERE.
Handling
Handling and Storage Precautions:HANDLE TO MINIMIZE FORMATN/RETENTION
OF DUST. HANDLE TO PREV EYE CONT,EXCESS/REPEAT SKIN CONT. USE
PROPER EYE&SKIN PROTECT. AVOID INHAL OF DUST&VAPORS
Other Precautions:ASBESTOS,LEAD COMPONENTS LOCKED INTO PHENOLIC RESIN
SY,DONT PRESENT A HAZ. ONLY WHEN RESIN SYS IS ABRADED&DUST IS
GENERATED THAT ASBESTOS FIBERS&LEAD PARTICULATES MAY BE REL&BECOME
AIRBORNE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED REPIRATOR FOR ASBESTOS &
TOXIC PARTICULATES.
Ventilation:LOCAL EXHAUST RECM IF HIGH CONCENTRATN OF DUST ARE
GENERATED
Eye Protection:SFTY GOGGLE/FULL FACESHLD
Other Protective Equipment:EYE PROTECTION SHOULD BE WORN IF DUST IS
GENERATED.
Supplemental Safety and Health
CHRONIC OVEREXP TO AIRBORNE CONC OF:ASBESTOS-POSS
ASBESTOSIS,MESOTHELTOMA;SMOKING&INHAL ASB FIBERS INCR LUNG CANCER
RISK. LEAD DUST-POSS LEAD POISONING (EARLY SYMP-ANEMIA);HAZ TO
FETUS IN PREG
Chemical Properties
HCC:T6
Solubility in Water:0%
Appearance and Odor:DARK BROWN SOLID
Percent Volatiles by Volume:0%
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:COMBUSTION PRODUCTS OF THIS MATERIAL
MAY BE TOXIC.
Disposal
Waste Disposal Methods:HANDLE DUST AS HAZARDOUS AIR POLLUTANT IAW 40
CFR 61 SUBPART M PERTAINING TO ASBESTOS. USE LANDFILLS APPROVED FOR
ASBESTOS DISPOSAL. SCRAP PARTS ARE NOT FRIABLE,ARE NOT RESTRICTED
UNDER AIR POLLUTION REGS. WASTE DISPOSAL MUST BE IAW FED,STATE&LOC
REG
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.